Products
Home
A Standard PCB employs conventional FR-4 substrates with through-hole technology and standard trace widths (>100µm), delivering cost-effective solutions for consumer electronics, industrial controls, and automotive subsystems requiring reliable signal routing without high-frequency or extreme-environment constraints.
10-Layer IT-180A Tg180 FR-4 HDI PCB 1.6mm Circuit Boards for Advanced Automotive and Networking Applications
Constructed with ITEQ IT-180A, a high-performance FR-4 material, this board is designed for complex applications where thermal stability and signal integrity are critical.
.jpg)
4-Layer 1.2mm High-Tg FR-4 TU-768 HDI PCB Coating Immersion Gold for Consumer Electronics and Automotive
This is a type of High-Tg 4-layer PCB Built on TU-768 material. Each layer is plated with 1oz copper.Soldering pads are coated with immersion gold and non-pads are with green solder mask.
.jpg)
TU-872 SLK Sp FR-4 Radio Frequency PCB Low Dk and Df High Thermal Reliability Printed Circuit Board
The PCB has a 4-layer hybrid stackup with a 0.5oz+plating ground layer, two 1oz ground layers, and a 0.5oz+plating signal layer.
Taconic TSM-DS3 High-Frequency PCB Double-Sided 30mil Taconic Substrate with 1oz Copper and Immersion Gold Finish
This Taconic TSM-DS3 high-frequency PCB is a 2-layer rigid board engineered for demanding RF and microwave applications.
6-Layer S1000-2M PCB HDI Printed Circuit Board 90 Ohm Impedance Control HASL Finish
This high-performance 6-layer HDI PCB is manufactured using FR-4 S1000-2M material, known for its high Tg and low CTE properties.