| |
|
| High speed PCB |
| |
|
High speed PCBs are specialized circuit boards designed to handle high-frequency signals and fast data transmission. These PCBs are essential in modern electronic devices, particularly in telecommunications, computing, and consumer electronics, where rapid signal processing is crucial. One of the key characteristics of high-speed PCBs is their ability to minimize signal loss and electromagnetic interference. This is achieved by making use of advanced materials, for instance, low-loss dielectric substrates which help to maintain signal integrity when operating at high frequencies. Moreover, high-speed PCBs often incorporate techniques like controlled impedance, differential signaling and careful routing of traces that further enhance the board's ability to optimize performance and ensure efficient data transfer without compromising quality. |
|
|
.JPG) |
| Rogers-RO3203-High-Frequency-PCB-2-Layer-30mil-0.762mm-Ceramic-filled-Laminates-for-Base-Station-Infrastructure |
For high-frequency PCB designs requiring consistent performance and affordability, Rogers RO3203 ceramic-filled laminates offer an optimized solution. Their 3.02 Dk and 0.0016 Df ensure minimal signal distortion even beyond 40 GHz, while the woven-glass reinforcement provides mechanical strength. The PTFE-based smooth surface of Rogers RO3203 substrate allows for high-precision etching, and compatibility with standard fabrication methods reduces production complexity. |
Tags:
High Frequency Circuit Boards |
Rogers RO3203 PCB |
RO3203 30mil Rogers Materials |
RO3203 Rogers Substrates |
RO3203 PCB |
|
|
| |
|
 |
| Rogers-6035HTC-PCB-on-20mil-Double-Sided-Ceramic-filled-PTFE-Composites-for-Power-Amplifiers |
| RT/duroid 6035HTC high - frequency circuit materials from Rogers Corporation are ceramic - filled PTFE composites suitable for high - power RF and microwave uses. The thermal conductivity of these materials is about 2.4 times greater than that of the standard RT/duroid 6000 products. The copper foil (electrodeposited and reverse - treated) used in these laminates has remarkable long - term thermal stability. As a result, RT/duroid 6035HTC PCBs are an exceptional pick for high - power applications. |
Tags:
RT/duroid-6035HTC Laminate |
RT/duroid 6035HTC high-frequency PCB |
Rogers RT/duroid 6035HTC PCB |
RT/duroid 6035HTC Price |
20mil RT/duroid 6035HTC Substrate |
|
|
| |
|
 |
| RO4003C-LoPro-RF-PCB-Rogers-60.7mil-Circuit-Board-With-Immersion-Gold-for-Power- Amplifiers |
| RO4003C LoPro PCBs rely on a special Rogers' technology. Thanks to this technology, the reverse - treated foil can be attached to the standard RO4003C dielectric. The result is a laminate with minimized conductor loss, which improves insertion loss and signal integrity. Moreover, it holds on to all the other appealing aspects of the standard RO4003C laminate system. |
Tags:
RO4003C LoPro 60.7 Mil PCB |
RO4003C LoPro Laminate |
RO4003C LoPro RFPCB |
LoPro RO4003C PCB |
60.7mil RO4003C LoPro |
|
|
| |
|
 |
| RO4350B-LoPro-PCB-30.7mil-Rogers-High-Frequency-PCB-Reverse-Treated-Foil-With-ENIG-for-Digital-Applications |
| RO4350B LoPro PCBs make use of a special Rogers' technology. This technology permits the reverse - treated foil to adhere to the standard RO4350B dielectric. This leads to a laminate that has low conductor loss, thus improving insertion loss and ensuring signal integrity. Additionally, it maintains all the other desirable attributes of the standard RO4350B laminate system. |
Tags:
RO4350B LoPro PCB |
RO4350B High Frequency PCB |
Reverse Treated Foil PCB |
Rogers RO4350B PCB |
30.7mil RO4350B Laminate |
|
|
| |
|
.JPG) |
| 60.7mil-RO4350B-LoPro-RF-PCB-Rogers-Reverse-Treated-Foil-PCB-Circuit-Board-With-Immersion-Gold |
Rogers' proprietary technology is applied in RO4350B LoPro PCBs. This technology allows the reverse - treated foil to connect to the standard RO4350B dielectric. As a result, the laminate has minimized conductor loss, which helps to enhance insertion loss and signal integrity. All the other appealing properties of the standard RO4350B laminate system are also kept intact. |
Tags:
RO4350B RTF PCB |
RO4350B ENIG PCB |
RO4350B PCB for Digital Applications |
RO4350B LoPro RF PCB |
2-Layer RO4350B LoPro PCB |
|
|
| |
|
.jpg) |
| TC350-Rogers-RF-PCB-for-Tower-Mounted-Amplifiers: 30mil-Double-Sided-Core-with-PTFE-Based-Composite |
| Rogers TC350 is a composite material made up of woven fiberglass for reinforcement, ceramic for filling, and a PTFE base, all of which are utilized in the creation of printed circuit boards. TC350 PCB is designed in such a way that it can achieve enhanced heat - transfer with its remarkable "Best - In - Class" thermal conductivity. At the same time, it is formulated to decrease dielectric loss and insertion loss. As a result of these reduced losses, amplifier and antenna gains are increased, and efficiencies are improved. |
Tags:
2 Layers TC350 PCB Materials |
TC350 Immersion Gold Finished PCB |
30mil TC350 High Frequency PCB |
TC350 Circuit Boards PCB |
Rogers TC350 PTFE PCB |
|
|
| |
|
.jpg) |
| Taconic-RF-60A-Microwave-Printed-Circuit-Board-1.27mm-50mil-2-Layer-RF-PCB-With-Immersion-Silver |
| RF - 60A is an organic - ceramic laminate from Taconic's Organic CERamic (ORCER) line of products. It is reinforced with woven glass, a result of Taconic's deep knowledge in ceramic fill technology and coated PTFE fiberglass. This laminate offers exceptional interlaminar bond strength and excellent solder resistance. Due to its unique formulation, it has low moisture absorption and consistent electrical performance. |
Tags:
50mil RF-60A PCB |
Taconic RF-60A Laminate |
Taconic RF-60A Price |
RF-60A RF circuits |
RF-60A Microwave PCB |
|
|
| |
|
.jpg) |
| RF-60A-Taconic-RF-PCB-60mil-1.524mm-Low-Electrical-Loss-Organic-Ceramic-Laminate-With-Immersion-Silver |
| RF - 60A, an organic - ceramic laminate in Taconic's Organic CERamic (ORCER) family, is reinforced by woven glass. Taconic's expertise in ceramic fill technology and coated PTFE fiberglass has given rise to this product. RF-60A PCB exhibits outstanding interlaminar bond strength and superior solder resistance. Its special composition leads to low moisture absorption and uniform electrical properties. |
Tags:
RF-60A High Frequency PCB |
RF-60A Low CTE PCB |
60Mil RF-60A PCB |
RF-60A PCB Online Purchase |
RF-60A Loss Tangent |
|
|
| |
|
.jpg) |
| Rogers-TMM10-30mil-0.762mm-Radio-Frequency-PCBs-with-Immersion-Gold-for-Filters-and-Couplers |
| Rogers TMM10 thermoset microwave PCBs, which are ceramic, hydrocarbon, and thermoset polymer composites, are tailored for high plated-thru-hole reliability in stripline and microstrip applications. The electrical and mechanical properties of TMM10 laminates integrate many of the advantages of ceramic and traditional PTFE microwave circuit laminates. Significantly, it bypasses the need for the specialized production techniques typical of these materials. |
Tags:
Rogers TMM10 Datasheet |
30mil TMM10 Substrate |
TMM10 High Frequency PCB |
Rogers TMM10 PCB |
TMM10 RF PCB |
|
|
| |
|
.jpg) |
| Rogers-TMM10-PCB-50mil-1.27mm-Thermoset-Microwave-Materials-with-Immersion-Gold-for-GPS-Antennas |
| Rogers TMM10 thermoset microwave PCBs are composite materials consisting of ceramic, hydrocarbon, and thermoset polymers. They are designed for stripline and microstrip applications where high reliability of plated-thru-holes is essential. TMM10 laminates possess electrical and mechanical properties that combine the merits of ceramic and traditional PTFE microwave circuit laminates. Importantly, it doesn't rely on the specialized production methods commonly used for these materials. |
Tags:
Rogers TMM10 Laminate |
TMM10 Rogers PCB |
50mil TMM10 Substrate |
TMM10 Datasheet |
TMM10 Snap On |
|
|
| |
|
| |
|
| |
|
