| |
|
|
|
|
|
|
|
|
Rogers RT duroid 5880LZ High Frequency PCB 10mil 20mil 50mil and 100mil for Stripline and Microstrip |
|
|
(Printed Circuit Boards are custom-made products. The picture and parameters shown are for reference only.) |
|
|
|
|
|
Rogers RT/duroid 5880LZ PCB employs advanced PTFE composite technology specifically engineered for high-precision stripline and microstrip circuit implementations. RT/duroid 5880LZ PCB material achieves exceptional weight reduction through its low-density filler composition, delivering superior performance in aerospace and radar systems where mass optimization is critical.
Rogers RT duroid 5880LZ PCB demonstrates remarkable electrical stability with an ultra-low dielectric constant that maintains consistency across production panels and frequency bands. RT duroid 5880LZ PCB characteristic, combined with its minimal dissipation factor, enables reliable operation in Ku-band and millimeter-wave applications. Rogers RT/duroid 5880LZ PCB technology ensures signal integrity preservation across microwave and satellite communication systems.
Optimized for high-frequency environments, RT/duroid 5880LZ laminate provides designers with a stable dielectric foundation for phased-array antennas and beamforming networks. Rogers RT/duroid 5880LZ PCB material’s electrical consistency and thermal stability make it indispensable for 5G infrastructure and defense electronics requiring precise impedance control and low-loss signal transmission. |
|
|
|
|
|
Features: |
|
|
1. Lowest dielectric constant of 2.00 +/- 0.04
2. Low dissipation factor ranging from .0021 to .0027 at 10GHz
3. Low Z-axis coefficient of thermal expansion at 40 ppm/°C
4. Lightweight / low density of 1.4 gm/cm sq.
5. Uniform electrical properties over a wide frequency range
6. Resistant to all solvents and reagents, hot or cold, normally used in etching or plating |
|
|
|
|
|
Typical applications: |
|
|
1. Airborne antenna system
2. Lightweight feed networks
3. Radar systems
4. Guidance systems
5. Point-to-point digital radio antennas |
|
|
|
|
.jpg) |
|
|
|
Our PCB Capability (RT duroid 5880LZ) |
|
PCB Capability (RT/duroid 5880LZ) |
PCB Material: |
Unique Filled PTFE Composites |
Designation: |
RT/Duroid 5880LZ |
Dielectric constant: |
2 |
Dissipation Factor |
0.0021 10GHz |
Layer count: |
Single Sided, Double Sided, Multilayer PCB, Hybrid PCB |
Copper weight: |
1oz (35µm), 2oz (70µm) |
Laminate thickness: |
10mil (0.254mm), 20mil (0.508mm), 50mil (1.270mm), 100mil (2.540mm ) |
PCB size: |
≤400mm X 500mm |
Solder mask: |
Green, Black, Blue, Yellow, Red etc. |
Surface finish: |
Bare copper, HASL, ENIG, Immersion silver, Immersion tin, ENEPIG, OSP, Pure gold plated etc.. |
|
|
|
|
Typical Value of RT duroid 5880LZ |
|
Property |
Typical Value RT/duroid® 5880LZ |
Direction |
Units |
Condition |
Test Method |
Dielectric Constant er,Process |
2.00 ± 0.04 |
Z |
|
10 GHz/23°C |
IPC-TM-650, 2.5.5.5 |
Dielectric Constant er,Design |
2.00 |
Z |
|
8 GHz - 40 GHz |
Differential Phase Length Method |
Dissipation Factor, tan |
Typ: 0.0021 Max: 0.0027 |
Z |
|
10GHz/23°C |
IPC-TM-650, 2.5.5.5 |
Thermal Coefficient of Dielectric Constant, er |
+20 |
Z |
ppm/°C |
-50°C to 150°C 10GHz |
IPC-TM-650, 2.5.5.5 |
Volume Resistivity |
1.74 X 10^7 |
|
Mohm•cm |
C-96/35/90 |
IPC-TM-650, 2.5.17.1 |
Surface Resistivity |
2.08 X 10^6 |
|
Mohm |
C-96/35/90 |
IPC-TM-650, 2.5.17.1 |
Electrical Strength |
40 |
|
KV |
D48/50 |
IPC-TM-650, 2.5.6 |
Dimensional Stability |
-0.38 |
X,Y |
% |
|
IPC-TM-650, 2.4.39A |
Moisture Absorption |
0.31 |
|
% |
24 hours/23°C |
IPC-TM-650, 2.6.2.1 |
Thermal Conductivity |
0.33 |
Z |
W/m/°K |
80°C |
ASTM C518 |
Coefficient of Thermal Expansion |
54, 47 40 |
X,Y Z |
ppm/°C |
0 to 150°C |
IPC-TM-650, 2.4.41 |
Outgassing |
|
|
|
|
TML |
0.01 |
|
% |
|
ASTM E-595 |
CVCM |
0.01 |
|
|
|
|
WVR |
0.01 |
|
|
|
|
Density |
1.4 |
|
gm/cm^3 |
|
ASTM D792 |
Copper Peel |
>4.0 |
|
pli |
|
IPC-TM-650, 2.4.8 |
Flammability |
V-O |
|
|
|
UL 94 |
Lead-Free Process Compatible |
YES |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hot Tags:
RT/Duroid 5880LZ Substrate PCB |
Rogers 5880LZ Printed Circuit Board |
RT Duroid 5880LZ High Frequency PCB |
50 Mil 100 Mil RT5880LZ PCB |
5880Iz Printed Circuit Board |
|
|
|
