| |
|
|
|
|
|
|
|
|
Rogers-RO4003C-LoPro-PCB-12.7mil-Reverse-Treated-Foil-RTF-Circuit-Board-for-High-Speed-Back-Planes |
|
|
(Printed Circuit Boards are custom-made products. The picture and parameters shown are for reference only.) |
|
|
|
|
|
RO4003C LoPro laminates utilize a patented technology from Rogers. This technology enables the reverse - treated foil to adhere to the standard RO4003C dielectric. As a result, the laminate has low conductor loss, which enhances insertion loss performance and signal integrity. At the same time, it retains all the other favorable characteristics of the standard RO4003C PCB system. |
|
|
 |
|
|
|
|
|
Features/Benefits: |
|
|
RO4003C materials are reinforced hydrocarbon/ceramic laminates with very low profile reverse treated foil.
1. Lower insertion loss
2. Low PIM
3. Increased signal integrity
4. High circuit density
Low Z-axis coefficient of thermal expansion
1. Multi-layer board capability
2. Design flexibility
Lead-free process compatible
1. High temperature processing
2. Meets environmental concerns
CAF resistant |
|
|
|
|
|
PCB Capability (RO4003C LoPro) |
|
|
Our PCB Capability (RO4003C LoPro) |
PCB Material: |
Hydrocarbon Ceramic Laminates |
Designation: |
RO4003C LoPro |
Dielectric constant: |
3.38±0.05 |
Layer count: |
Double Layer, Multilayer, Hybrid PCB |
Copper weight: |
0.5oz (17 µm), 1oz (35µm), 2oz (70µm) |
PCB thickness: |
12.7mil (0.323mm), 16.7mil (0.424mm), 20.7mil(0.526mm), 32.7mil (0.831mm), 60.7mil(1.542mm) |
PCB size: |
≤400mm X 500mm |
Solder mask: |
Green, Black, Blue, Yellow, Red etc. |
Surface finish: |
Bare copper, HASL, ENIG, OSP, Immersion tin etc.. |
|
|
|
|
|
|
Typical applications: |
|
|
1.Digital applications such as servers, routers, and high speed back planes
2.Cellular base station antennas and power amplifiers
3.LNB’s for direct broadcast satellites
4.RF Identification Tags |
|
|
|
|
Typical Properties of RO4003C LoPro |
|
RO4003C LoPro |
Property |
Typical Value |
Direction |
Units |
Condition |
Test Method |
Dielectric Constant, Process |
3.38 ± 0.05 |
z |
-- |
10 GHz/23°C |
IPC-TM-650 2.5.5.5 Clamped Stripline |
Dielectric Constant, Design |
3.5 |
z |
-- |
8 to 40 GHz |
Differential Phase Length Method |
Dissipation Factor tan, d |
0.0027 0.0021 |
z |
-- |
10 GHz/23°C 2.5 GHz/23°C |
IPC-TM-650 2.5.5.5 |
Thermal Coeffifi cient of er |
40 |
z |
ppm/°C |
-50°C to 150°C |
IPC-TM-650 2.5.5.5 |
Volume Resistivity |
1.7 X 1010 |
|
MΩ•cm |
COND A |
IPC-TM-650 2.5.17.1 |
Surface Resistivity |
4.2 X 109 |
|
MΩ |
COND A |
IPC-TM-650 2.5.17.1 |
Electrical Strength |
31.2(780) |
z |
KV/mm(V/mil) |
0.51mm(0.020”) |
IPC-TM-650 2.5.6.2 |
Tensile Modulus |
26889(3900) |
Y |
MPa(kpsi) |
RT |
ASTM D638 |
Tensile Strength |
141(20.4) |
Y |
MPa(kpsi) |
RT |
ASTM D638 |
Flexural Strength |
276(40) |
|
MPa(kpsi) |
|
IPC-TM-650 2.4.4 |
Dimensional Stability |
<0.3 |
X,Y |
mm/m(mils/inch) |
after etch +E2/150°C |
IPC-TM-650 2.4.39A |
Coeffifi cient of Thermal Expansion |
11 |
x |
ppm/°C |
-55 to 288°C |
IPC-TM-650 2.1.41 |
|
14 |
y |
|
|
|
|
46 |
z |
|
|
|
Tg |
>280 |
|
°C TMA |
A |
IPC-TM-650 2.4.24.3 |
Td |
425 |
|
°C TGA |
|
ASTM D3850 |
Thermal Conductivity |
0.64 |
|
W/m/°K |
80°C |
ASTM C518 |
Moisture Absorption |
0.06 |
|
% |
48 hrs immersion 0.060” sample Temperature 50°C |
ASTM D570 |
Density |
1.79 |
|
gm/cm3 |
23°C |
ASTM D792 |
Copper Peel Strength |
1.05(6.0) |
|
N/mm(pli) |
after solder float 1 oz. TC Foil |
IPC-TM-650 2.4.8 |
Flammability |
N/A |
|
|
|
UL 94 |
Lead-Free Process Compatible |
Yes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hot Tags:
RO4003C LoPro PCB |
Rogers LoPro RTF PCB |
Rogers RTF PCB |
RO4003C Circuit Board |
LoPro RTF Circuit Board |
|
|
|
