| |
|
|
|
|
|
|
|
|
15mil-Rogers-TMM10-High-Frequency-PCB-With-Immersion-Gold-and-Green-Solder-Mask-for-Chip-Testers |
|
|
(Printed Circuit Boards are custom-made products. The picture and parameters shown are for reference only.) |
|
|
|
|
|
Rogers’ TMM10 thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites. They are engineered for high-reliability stripline and microstrip applications with plated-thru-holes.
Rogers TMM10 laminates blend the advantages of ceramic and traditional PTFE microwave circuit laminates in terms of electrical and mechanical properties. Notably, it doesn't demand the specialized production techniques usually associated with such materials. These laminates feature an extremely low thermal coefficient of dielectric constant, usually under 30 ppm/°C. Their isotropic coefficients of thermal expansion, which closely match those of copper, enable the production of highly reliable plated through holes and low etch shrinkage values. Additionally, the thermal conductivity of TMM10 laminates is roughly double that of traditional PTFE/ceramic laminates, which helps with heat dissipation.
Since TMM10 PCBs are made of thermoset resins and don't soften upon heating, wire bonding of component leads to circuit traces can be carried out without worries about pad lifting or substrate deformation. |
|
|
|
|
|
Typical applications: |
|
|
1. Chip testers
2. Dielectric polarizers and lenses
3. Filters and coupler
4. Global Positioning Systems Antennas
5. Patch Antennas
6. Power amplifiers and combiners
7. RF and microwave circuitry
8. Satellite communication systems |
|
|
|
|
|
Our Capabilities (TMM10 PCB) |
|
|
PCB Capability (TMM10) |
PCB Material: |
Ceramic, Hydrocarbon, Thermoset Polymer Composites |
Designation: |
TMM10 |
Dielectric constant: |
9.20 ±0.23 |
Layer count: |
Single Layer, Double Layer, Multilayer, Hybrid PCB |
Copper weight: |
1oz (35µm), 2oz (70µm) |
PCB thickness: |
15mil (0.381mm), 20mil (0.508mm), 25mil (0.635mm), 30mil(0.762mm), 50mil (1.27mm), 60mil (1.524mm), 75mil(1.905mm), 100mil (2.54mm), 125mil (3.175mm), 150mil (3.81mm), 200mil (5.08mm), 250mil (6.35mm), 275mil (6.985mm), 300mil (7.62mm), 500mil (12.70mm) |
|
|
PCB size: |
≤400mm X 500mm |
Solder mask: |
Green, Black, Blue, Yellow, Red etc. |
Surface finish: |
Bare copper, HASL, ENIG, Immersion Silver, Immersion Tin, ENEPIG, Pure Gold, OSP etc.. |
|
|
|
|
.jpg) |
|
|
|
Data Sheet of TMM10 PCB |
|
TMM10 Typical Value |
Property |
TMM10 |
Direction |
Units |
Condition |
Test Method |
Dielectric Constant,εProcess |
9.20±0.23 |
Z |
|
10 GHz |
IPC-TM-650 2.5.5.5 |
Dielectric Constant,εDesign |
9.8 |
- |
- |
8GHz to 40 GHz |
Differential Phase Length Method |
Dissipation Factor (process) |
0.0022 |
Z |
- |
10 GHz |
IPC-TM-650 2.5.5.5 |
Thermal Coefficient of dielectric constant |
-38 |
- |
ppm/°K |
-55℃-125℃ |
IPC-TM-650 2.5.5.5 |
Insulation Resistance |
>2000 |
- |
Gohm |
C/96/60/95 |
ASTM D257 |
Volume Resistivity |
2 x 108 |
- |
Mohm.cm |
- |
ASTM D257 |
Surface Resistivity |
4 x 107 |
- |
Mohm |
- |
ASTM D257 |
Electrical Strength(dielectric strength) |
285 |
Z |
V/mil |
- |
IPC-TM-650 method 2.5.6.2 |
Thermal Properties |
Decompositioin Temperature(Td) |
425 |
425 |
℃TGA |
- |
ASTM D3850 |
Coefficient of Thermal Expansion - x |
21 |
X |
ppm/K |
0 to 140 ℃ |
ASTM E 831 IPC-TM-650, 2.4.41 |
Coefficient of Thermal Expansion - Y |
21 |
Y |
ppm/K |
0 to 140 ℃ |
ASTM E 831 IPC-TM-650, 2.4.41 |
Coefficient of Thermal Expansion - Z |
20 |
Z |
ppm/K |
0 to 140 ℃ |
ASTM E 831 IPC-TM-650, 2.4.41 |
Thermal Conductivity |
0.76 |
Z |
W/m/K |
80 ℃ |
ASTM C518 |
Mechanical Properties |
Copper Peel Strength after Thermal Stress |
5.0 (0.9) |
X,Y |
lb/inch (N/mm) |
after solder float 1 oz. EDC |
IPC-TM-650 Method 2.4.8 |
Flexural Strength (MD/CMD) |
13.62 |
X,Y |
kpsi |
A |
ASTM D790 |
Flexural Modulus (MD/CMD) |
1.79 |
X,Y |
Mpsi |
A |
ASTM D790 |
Physical Properties |
Moisture Absorption (2X2) |
1.27mm (0.050") |
0.09 |
- |
% |
D/24/23 |
ASTM D570 |
|
3.18mm (0.125") |
0.2 |
|
|
|
|
Specific Gravity |
2.77 |
- |
- |
A |
ASTM D792 |
Specific Heat Capacity |
0.74 |
- |
J/g/K |
A |
Calculated |
Lead-Free Process Compatible |
YES |
- |
- |
- |
- |
|
|
|
|
|
|
|
|
|
|
|
|
Hot Tags:
Rogers TMM10 Datasheet |
15mil TMM10 Thickness |
TMM10 High Frequency PCB |
Rogers TMM10 PCB |
TMM10 Immersion Gold PCB |
|
|
|
