IsoClad 917 PCB Supplier

WELCOME TO BICHENG

Home
Company
Quality
Manufacture
Career
PCB Boards
- Newly Shipped RF PCB
- High Frequency PCB
Contact Us

IsoClad 917 High Frequency PCB 2-layer 62mil

Shipped: 13th-MAR-2024

1. Introduction of IsoClad 917

Rogers IsoClad 917 laminates are non-woven fiberglass/PTFE composites used as printed circuit board substrates with a dielectric constant (Dk) of 2.17 or 2.20. IsoClad 917 laminates use a low ratio of non-woven fiberglass/PTFE to achieve the lowest dielectric constant and dissipation factor available in its class. The non-woven reinforcement allows these laminates to be used in applications where the final PCB may be bent in shape, including con-formal or wrap-around antennas. IsoClad 917's longer random fibers and proprietary process provide greater dimensional stability and dielectric constant uniformity than competitors in similar classes.

2. Features

- DK of 2.17 or 2.20 at 10 GHz/23°C
- Dissipation factor of 0.0013 at 10 GHz/23°C
- TcDK of -157 ppm/°C ranging -10~140°C
- Strong peel strength of 10 lbs. per inch
- Low Moisture Absorption of 0.04%
- CTE in X-axis of 46 ppm/°C, Y-axis of 47 ppm/°C and Z-axix of 236ppm/°C
- UL-94 V0 fammability

3. Benefits

- Nonwoven Fiberglass Reinforcement
- Low Dielectric Constant
- Extremely Low Loss
- Low moisture absorption
- Less Rigid than Woven Fiberglass
- Highly Isotropic in X, Y and Z Directions
- Stable Dk over range of frequencies
- Improved dimensional stability

4. PCB Stackup: 2-layer rigid PCB

Copper_layer_1 - 35 μm
IsoClad 917 - 1.575 mm (62mil)
Copper_layer_2 - 35 μm

5. PCB Construction details:

- Board dimensions: 70mm x 42 mm=1PCS, +/- 0.15mm
- Minimum Trace/Space: 4/6 mils
- Minimum Hole Size: 0.4mm
- No Blind vias.
- Finished board thickness: 1.6mm
- Finished Cu weight: 1oz (1.4 mils) outer layers
- Via plating thickness: 20 μm
- Surface finish: Immesion Gold
- Top Silkscreen: No
- Bottom Silkscreen: No
- Top Solder Mask: Green
- Bottom Solder Mask: No
- 100% Electrical test used prior to shipment

6. PCB Statistics:

Components: 29
Total Pads: 53
Thru Hole Pads: 32
Top SMT Pads: 21
Bottom SMT Pads: 0
Vias: 28
Nets: 2

7. Type of artwork supplied: Gerber RS-274-X

8. Accepted standard: IPC-Class-2

9. Availability: worldwide

10. Some Typical Applications:

- Conformal Antennas
- Stripline and Microstrip Circuits
- Guidance Systems
- Radar and Electronic Systems

BACK TO MARCH

Tags Printed Circuit Board, High Frequency PCB, RF PCB, Microwave PCB, Rogers PCB, Rogers RO3003, RO3003G2, RO3010, RO3006, RO3035, RO3203, RO3206, RO3210, Rogers RO4003C, RO4350B, RO4360G2, RO4725JXR, RO4730G3, RO4533, RO4534, RO4535, RO4830, RO4835, RT/duroid 5880, RT/duroid 5870, RT/duroid 6002, RT/duroid 6010, RT/duroid 6035HTC, Rogers TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Rogers Kappa438, CLTE-XT, AD250C, AD255C, AD300D, AD350A, AD450, AD600, AD1000, TC350, TC600, DiClad 880, DiClad 870, DiClad 527, IsoClad 917; Taconic PCB, TLF-35, RF-35TC, RF-60A, RF-60TC, RF-35A2, RF-35, RF-45, RF-10, TRF-45, TLX-0, TLX-9, TLX-8, TLX-7, TLX-6, TLY-3, TLY-5, TLY-5Z, TSM-DS3, PTFE PCB, Wangling RF PCB, F4BM220, F4BME220, F4BTM220, F4BTME220, F4BTMS220