Shenzhen Bicheng Electronics Technology Co., Ltd
深圳市碧澄电子科技有限公司
+86-755-27374946
info@bicheng-enterprise.com
WELCOME TO BICHENG

 

 

 

 

DiClad 527 PCB 2-layer 60mil

Shipped: 12th-September-2024  

1. Introduction of DiClad 527
Rogers DiClad 527 laminates are woven fiberglass reinforced, PTFE-based composite materials for use as printed circuit board substrates.
They offer a higher ratio of fiberglass reinforcement to PTFE content to provide mechanical properties approaching conventional substrates. This carefully controlled ratio provides a higher dielectric constant (Dk) range and better dimensional stability and lower thermal expansion in all directions.

2. Features
- DK range of 2.4 to 2.6 at 10 GHz and 1 MHz, 50% RH
- Dissipation factor of 0.0017 at 10 GHz, 0.0010 at 1MHz, 50% RH
- TcDK of -153 ppm/°C ranging -10~140°C, 10 GHz
- Low Moisture Absorption 0.03%
- CTE in X-axis of 14 ppm/°C, Y-axis of 21 ppm/°C and Z-axix of 173 ppm/°C
3. Benefits
- Extremely Low Loss Tangent
- Excellent Dimensional Stability
- Product Performance Uniformity
- Electrical Properties are Highly Uniform Across Frequency
- Consistent Mechanical Performance
- Excellent Chemical Resistance
- Stable Dk over wide frequency range
- Low circuit losses at high frequency
- Negligible performance drift caused by high humidity environments
4. PCB Stackup: 2-layer rigid PCB
Copper_layer_1 - 35 μm
DiClad 527 - 1.524 mm (60mil)
Copper_layer_2 - 35 μm
5. PCB Construction details:
- Board dimensions: 45.78mm x 27.48mm=1PCS, +/- 0.15mm
- Minimum Trace/Space: 5/5 mils
- Minimum Hole Size: 0.3mm
- No Blind vias.
- Finished board thickness: 1.6mm
- Finished Cu weight: 1oz (1.4 mils) outer layers
- Via plating thickness: 20 μm
- Surface finish: Immersion gold
- Top Silkscreen: White
- Bottom Silkscreen: No
- Top Solder Mask: Red
- Bottom Solder Mask: No
- 100% Electrical test used prior to shipment
6. PCB Statistics:
Components: 19
Total Pads: 60
Thru Hole Pads: 46
Top SMT Pads: 14
Bottom SMT Pads: 0
Vias: 27
Nets: 2
7. Type of artwork supplied: Gerber RS-274-X
8. Accepted standard: IPC-Class-2
9. Availability: worldwide
10. Some Typical Applications:
- Radar Feed Networks
- Commercial Phased Array Networks
- Low Loss Base Station Antennas
- Guidance Systems
- Digital Radio Antennas
- Filters, Couplers, LNAs
 
 
 
 
 
 
  PCBBACK TO SEPTEMBER
　

Copyright  © Shenzhen Bicheng Electronics Technology Co., Ltd. All rights reserved

Tags Printed Circuit Board, High Frequency PCB, RF PCB, Microwave PCB, Rogers PCB, Rogers RO3003, RO3003G2, RO3010, RO3006, RO3035, RO3203, RO3206, RO3210, Rogers RO4003C, RO4350B, RO4360G2, RO4725JXR, RO4730G3, RO4533, RO4534, RO4535, RO4830, RO4835, RT/duroid 5880, RT/duroid 5870, RT/duroid 6002, RT/duroid 6010, RT/duroid 6035HTC, Rogers TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Rogers Kappa438, CLTE-XT, AD250C, AD255C, AD300D, AD350A, AD450, AD600, AD1000, TC350, TC600, DiClad 880, DiClad 870, DiClad 527, IsoClad 917; Taconic PCB, TLF-35, RF-35TC, RF-60A, RF-60TC, RF-35A2, RF-35, RF-45, RF-10, TRF-45, TLX-0, TLX-9, TLX-8, TLX-7, TLX-6, TLY-3, TLY-5, TLY-5Z, TSM-DS3, PTFE PCB, Wangling RF PCB, F4BM220, F4BME220, F4BTM220, F4BTME220, F4BTMS220