TLX-9 PCB 2-layer 20mil

WELCOME TO BICHENG

Shipped: 26th-Dec-2023

1. TLX-9 Introduction
TLX-9 is a composite of PTFE/woven glass laminates with exceptionally well controlled electrical and mechanical properties. The Dk
can be specified anywhere within this range with a tolerance of ±.04. The dissipation factor is approximately .0019 when measured at 10 GHz.

2. TLX-9 material has the following properties:
Dielectric Constant @ 10 GHz: 2.5
Dissipation Factor @ 10 GHz: 0.0019
Moisture Absorption: <0.02%
Dielectric Breakdown: >60 kV
Volume Resistivity: 10^7 Mohm/cm
Surface Resistivity: 10^7 Mohm
Arc Resistance: >180 seconds
Flexural Strength Lengthwise: >23,000 lbs./in.
Flexural Strength Crosswise: >19,000 lbs./in.
Peel Strength (1oz copper): 12 lbs./linear in.
Thermal Conductivity: 0.19 W/m/K
x-y CTE (Coefficient of Thermal Expansion): 9-12 ppm/°C
z CTE (Coefficient of Thermal Expansion): 130-145 ppm/°C
UL-94 Flammability Rating: V-0

3. Benefits:
- Low Dielectric Constant
- Low Dissipation Factor
- Low Moisture Absorption
- High Dielectric Breakdown
- Good Peel Strength
- Controlled Coefficient of Thermal Expansion (CTE)

4. PCB Stackup: 2-layer rigid PCB
Copper_layer_1 - 35 μm
Taconic TLX-9 Core - 0.508 mm (20mil)
Copper_layer_2 - 35 μm

5. PCB Construction details:
- Board dimensions: 41.5mm x 32.72 mm=1PCS, +/- 0.15mm
- Minimum Trace/Space: 7/8 mils
- Minimum Hole Size: 0.4mm
- No Blind vias.
- Finished board thickness: 0.6mm
- Finished Cu weight: 1oz (1.4 mils) outer layers
- Via plating thickness: 20 μm
- Surface finish: Immersion Gold
- Top Silkscreen: No
- Bottom Silkscreen: No
- Top Solder Mask: No
- Bottom Solder Mask: No
- 100% Electrical test used prior to shipment

6. PCB Statistics:
Components: 6
Total Pads: 14
Thru Hole Pads: 9
Top SMT Pads: 5
Bottom SMT Pads: 0
Vias: 7
Nets: 2

7. Type of artwork supplied: Gerber RS-274-X

8. Quality standard: IPC-Class-2

9. Availability: worldwide

10. Some Typical Applications:
- LNAs, LNBs, and LNCs
- Personal Communications Service / Personal Communications Network ( PCS/PCN) Large Format Antennas
- High Power Amplifiers
- Passive Components

BACK TO DECEMBER

Tags Printed Circuit Board, High Frequency PCB, RF PCB, Microwave PCB, Rogers PCB, Rogers RO3003, RO3003G2, RO3010, RO3006, RO3035, RO3203, RO3206, RO3210, Rogers RO4003C, RO4350B, RO4360G2, RO4725JXR, RO4730G3, RO4533, RO4534, RO4535, RO4830, RO4835, RT/duroid 5880, RT/duroid 5870, RT/duroid 6002, RT/duroid 6010, RT/duroid 6035HTC, Rogers TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Rogers Kappa438, CLTE-XT, AD250C, AD255C, AD300D, AD350A, AD450, AD600, AD1000, TC350, TC600, DiClad 880, DiClad 870, DiClad 527, IsoClad 917; Taconic PCB, TLF-35, RF-35TC, RF-60A, RF-60TC, RF-35A2, RF-35, RF-45, RF-10, TRF-45, TLX-0, TLX-9, TLX-8, TLX-7, TLX-6, TLY-3, TLY-5, TLY-5Z, TSM-DS3, PTFE PCB, Wangling RF PCB, F4BM220, F4BME220, F4BTM220, F4BTME220, F4BTMS220