TLX-7 PCB 2-layer 20mil

WELCOME TO BICHENG

TLX-7 PCB 2-layer 20mil with Immersion Silver

Shipped: 13th-Dec-2023

1. TLX-7 Introduction
TLX-7 is PTFE fiberglass laminates, a type of high volume antenna material which offers reliability in a wide range of RF applications. This material is versatile due to its wide range available thicknesses and copper cladding. It is suitable for low layer count microwave designs, offering mechanical reinforcementwherever a substrate experiences severe environments such as:
- Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch
- High temperature exposure in engine modules
- Radiation resistance in space (see NASA’s website for low outgassing materials)
- Resistance to extreme environments at sea for warship antennas
- Resistance to a wide temperature range for altimeter substrates during flight

2. Benefits
- Excellent PIM Values in PCBs (measured at lower than -160 dBc*)
- Excellent Mechanical & Thermal Properties
- Low and Stable Dk
- Dimensionally Stable
- Low Moisture Absorption
- Tightly Controlled DK
- Low DF
- UL 94 V0 Rating
- For Low Layer Count Microwave Designs

3. Main Properties
- Electrical Properties
Dk @ 10 GHz: 2.6 +/-0.04 (IPC-650 2.5.5.3)
Df @ 1.9 GHz: 0.0014 (IPC-650 2.5.5.5.1)
Df @ 10 GHz: 0.002 (IPC-650 2.5.5.5.1)

Outgassing (% TML): 0.02 (ASTM E 595, 24 H 257 °F @ ≤ 5 x 10-5 Torr)
Outgassing (% CVCM): 0 (ASTM E 595, 24 H 257 °F @ ≤ 5 x 10-5 Torr)
Outgassing (% WVR): 0.01 (ASTM E 595, 24 H 257 °F @ ≤ 5 x 10-5 Torr)

Dielectric available thickness ranges 0.13-0.76mm
Peel strength of 12 lbs/in
Moisture Absorption - 0.02 % IPC-650 2.6.2.1
Thermal Conductivity - 0.22 W/M*K - ASTM F433/ASTM 1530-06

CTE (25-260 °C)
X - 21 ppm/°C - IPC-650 2.4.41/ASTM D 3386
Y - 23 ppm/°C - IPC-650 2.4.41/ASTM D 3386
Z - 215 ppm/°C - IPC-650 2.4.41/ASTM D 3386

Flammability Rating - V-0 - UL-94

4. PCB Stackup: 2-layer rigid PCB
Copper_layer_1 - 35 μm
Taconic TLX-7 Core - 0.508 mm (20mil)
Copper_layer_2 - 35 μm

5. PCB Construction details:
- Board dimensions: 91mm x 75 mm=1PCS, +/- 0.15mm
- Minimum Trace/Space: 4/5 mils
- Minimum Hole Size: 0.3mm
- No Blind vias.
- Finished board thickness: 0.6mm
- Finished Cu weight: 1oz (1.4 mils) outer layers
- Via plating thickness: 20 μm
- Surface finish: Immersion Silver
- Top Silkscreen: No
- Bottom Silkscreen: No
- Top Solder Mask: No
- Bottom Solder Mask: No
- 100% Electrical test used prior to shipment

6. PCB Statistics:
Components: 15
Total Pads: 63
Thru Hole Pads: 37
Top SMT Pads: 26
Bottom SMT Pads: 0
Vias: 43
Nets: 4

7. Type of artwork supplied: Gerber RS-274-X

8. Quality standard: IPC-Class-2

9. Availability: worldwide

10. Some Typical Applications:
- radar systems
- mobile communications
- microwave test equipment
- microwave transmission devices
- couplers, splitters, combiners, amplifiers, antennas

BACK TO DECEMBER

Tags Printed Circuit Board, High Frequency PCB, RF PCB, Microwave PCB, Rogers PCB, Rogers RO3003, RO3003G2, RO3010, RO3006, RO3035, RO3203, RO3206, RO3210, Rogers RO4003C, RO4350B, RO4360G2, RO4725JXR, RO4730G3, RO4533, RO4534, RO4535, RO4830, RO4835, RT/duroid 5880, RT/duroid 5870, RT/duroid 6002, RT/duroid 6010, RT/duroid 6035HTC, Rogers TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Rogers Kappa438, CLTE-XT, AD250C, AD255C, AD300D, AD350A, AD450, AD600, AD1000, TC350, TC600, DiClad 880, DiClad 870, DiClad 527, IsoClad 917; Taconic PCB, TLF-35, RF-35TC, RF-60A, RF-60TC, RF-35A2, RF-35, RF-45, RF-10, TRF-45, TLX-0, TLX-9, TLX-8, TLX-7, TLX-6, TLY-3, TLY-5, TLY-5Z, TSM-DS3, PTFE PCB, Wangling RF PCB, F4BM220, F4BME220, F4BTM220, F4BTME220, F4BTMS220