Rogers RT/duroid 5870 high frequency PC

WELCOME TO BICHENG

Rogers RT/duroid 5870 high frequency PCB 2-layer 31mil 0.813mm rigid PCB

Shipped: 7th-Dec-2023

1. RT/duroid 5870 Introduction
Rogers RT/duroid 5870 high frequency laminates are PTFE composites reinforced with glass microfibers. They offer high frequency with low dielectric constant (Dk). The randomly oriented microfibers in the PTFE composites result in exceptional Dk uniformity. With its low Dk loss, RT/duroid 5870 laminates are well suited for high frequency/broadband applications where dispersion and losses need to be minimized.

2. Features
- Dielectric constant of 2.33 with tight tolerance 0.02 at 10 GHz/23°C
- Dissipation factor of 0.0012 at 10GHz
- Temperature coefficient of dielectric constant (TCDk) of -115 ppm/°C
- Low Moisture Absorption 0.02%
- CTE in X-axis of 22 ppm/°C, Y-axis of 28 ppm/°C and Z-axix of 173 ppm/°C
- Isotropic

3. Benifits
- Lowest electrical loss for reinforced PTFE material
- Easily cut, shared and machined to shape
- Resistant to solvents and reagents used in etching or plating edges and holes
- Ideal for high moisture environments
- Well-established material
- Uniform electrical properties over wide frequency range

4. PCB Stackup: 2-layer rigid PCB
Copper_layer_1 - 35 μm
RT/duroid 5870 - 0.787 mm (31mil)
Copper_layer_2 - 35 μm

5. PCB Construction details:
- Board dimensions: 35mm x 22.5 mm=1PCS, +/- 0.15mm
- Minimum Trace/Space: 5/5 mils
- Minimum Hole Size: 0.3mm
- No Blind vias.
- Finished board thickness: 0.87mm
- Finished Cu weight: 1oz (1.4 mils) outer layers
- Via plating thickness: 20 μm
- Surface finish: bare copper
- Top Silkscreen: No
- Bottom Silkscreen: No
- Top Solder Mask: No
- Bottom Solder Mask: No
- 100% Electrical test used prior to shipment

6. PCB Statistics:
Components: 7
Total Pads: 19
Thru Hole Pads: 12
Top SMT Pads: 7
Bottom SMT Pads: 0
Vias: 5
Nets: 2

7. Type of artwork supplied: Gerber RS-274-X

8. Accepted standard: IPC-Class-2

9. Availability: worldwide

10. Some Typical Applications:
- Commercial Airline Broadband Antennas
- Microstrip and Stripline Circuits
- Millimeter Wave Applications
- Radar Systems
- Guidance Systems
- Point to Point Digital Radio Antennas

BACK TO DECEMBER

Tags Printed Circuit Board, High Frequency PCB, RF PCB, Microwave PCB, Rogers PCB, Rogers RO3003, RO3003G2, RO3010, RO3006, RO3035, RO3203, RO3206, RO3210, Rogers RO4003C, RO4350B, RO4360G2, RO4725JXR, RO4730G3, RO4533, RO4534, RO4535, RO4830, RO4835, RT/duroid 5880, RT/duroid 5870, RT/duroid 6002, RT/duroid 6010, RT/duroid 6035HTC, Rogers TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Rogers Kappa438, CLTE-XT, AD250C, AD255C, AD300D, AD350A, AD450, AD600, AD1000, TC350, TC600, DiClad 880, DiClad 870, DiClad 527, IsoClad 917; Taconic PCB, TLF-35, RF-35TC, RF-60A, RF-60TC, RF-35A2, RF-35, RF-45, RF-10, TRF-45, TLX-0, TLX-9, TLX-8, TLX-7, TLX-6, TLY-3, TLY-5, TLY-5Z, TSM-DS3, PTFE PCB, Wangling RF PCB, F4BM220, F4BME220, F4BTM220, F4BTME220, F4BTMS220